For over 30 years Titan Mainsprings have been supplied worldwide to airgun enthusiasts, professional airgun customisers and the Gun Trade and have established themselves as the top quality mainspring against which all other mainsprings are compared.
Only the finest quality Grade 1 Swedish Silicon Chrome Vanadium Spring Steel is used. We use no mass production methods. Every spring is hand wound to an exact specification, then heat treated and tempered to ensure ultimate performance and maximum durability. During final tempering, they are coated with a specially formulated hard, but flexible finish. This is a high technology coating and its self-lubricating multislip properties eliminates the need for conventional spring lubrication.
Each Titan XS spring is hand wound to exact specification, then heat treated and tempered to ensure ultimate performance and maximum durability. During the final tempering stage, they are coated with a specially formulated finish, a derivative of PTFE and Teflon that is hard yet flexible. Self-lubricating multiislip properties eliminates the need for conventional spring lubrication, however grease application is still recommended. The almost friction free operation of the Titan XS Mainspring reduces the possibilities of dieseling to a minimum. Maximum power is maintained for longer than most other springs.
The almost friction-free operation of the Titan XS Mainspring reduces the possibilities of dieseling to a minimum and increases power by up to 40% for FAC rated air weapons. Maximum power is maintained for longer than most other springs. Titan XS Mainsprings do not lose power when left cocked for long periods.
These spring may need fitting, if unsure consult an expert. May take your rifle over the Legal Limit, it is up to you to check and keep in the limit.
We do not take any responsibility for incorrect fitting or misuse.
Titan XS Mainsprings do not lose power when left cocked for long periods.
Please note: For the installation of springs into Air Rifles it is sometimes necessary to remove coils by way of grinding or cutting the spring. This is normal and should be taken into consideration before fitting. Please test your airgun with a chronograph to ensure you remain below the UK power limit
NO 1 :
BSA Airsporter, Mercury, Challenger, 635 Magnum, Supersport, Lightning, XL, XL Tactical, XL SE, Superstar, Goldstar, Centenary.
Air Arms Firepower, Jackal, Woodsman. Khamsin
Original/Diana Model 34/35/36/38/45 (48/52/54 std power),
Weihrauch / Beeman HW99, HW99S, HW77, HW77K
FWB 124, 127.
RWS Firebird
NO 2 :
Weihrauch / Beeman HW80, HW80K HW90(To Replace Gas Ram)
Air Arms Pro Elite.
NO 3 :
Weihrauch / Beeman HW97, HW97K
Original / Diana Mod 35/45/50,
Hammerli 401
NO 4 :
Weihrauch / Beeman HW35, HW35k
Webley Eclipse(std).
NO 5 :
BSA Meteor MK1, 2, 3, 4, 5,
Original / Diana Mod 24, 26, 27, 28, G46, 70, 71, 78, 79,80,
SMK XS19, XS38, XS20( MKI)
NO 6 :
BSA Meteor MK6 & MK7, Comet.
Crosman Phantom. Mod 800
SMK Models up to 345mm springs (cut to required length) XS38, XS19, QB36, SMK XS208, SMK SYNSG, Ruger Blackhawk
NO 7 :
BSA Polaris,
Webley: Tracker, Osprey, Excel, Viscount, Xocet, Stingray, Falcon, Hawk MK1-3
Norica All models, (except Black Eagle)
Relum All models (USING EXISTING INNER),
Baikal All models
Cometa 5,
Haenel mod. 303,
Gamo Sniper,Expo, Hunter 440, Commando, Delta, Apache, CF16, Rangemaster, CFX, Statical, Magnum, 1000, Shadow, CSI, Whisper, 68.
Gunmark Phantom, NAC,
Weihrauch / Beeman HW50, HW55 & 55T,
SMK XS208, SMK SYNSG,
Ruger Blackhawk
Westlake
NO 8 :
Webley Vulcan, Victor, Omega, Longbow, Tomahawk,
Weihrauch / Beeman HW95, HW95K, HW98, HW98K
Gamo 3000,
NO 9 :
Air Arms TX200 MK1 & MK2,
Weihrauch / Beeman HW57, HW57K
NO 10 :
Air Arms TX200 MK3, Pro Sport
